Raised pools
The collection
Three lines, one idea: no building work.
All three share the patented Desingpool system: self-supporting, insulated, factory-tested and made to measure.
No building work · No permit
Set in place, not built.
Your pool. No building work. No permit.
We make raised pools that arrive finished: they are built and tested full of water at our factory in Balsicas, Murcia, travel fully equipped and are set in place by crane.
They are not dug in or anchored to the ground, so they need no plans or building permit (every town hall has its own rules: we check your case with you). They are installed in about two days and, if you ever move house, they can go with you.
The second generation of a family that has been making pools for over 40 years.
Contents
The system
What all three lines share.
Self-supporting
A galvanised metal frame, made to measure: it is not dug in or anchored to the ground.
Factory-tested
Full of water for 24 hours before it leaves the factory.
Insulated
86% more thermal insulation: the water keeps its heat.
Lightweight
An EPS shell: it weighs 95% less than concrete.
In 24–48 hours
It arrives finished and equipped, is craned into place and filled.
Made to measure
From 2.90 to 6.90 m long including the steps, 2.00 to 3.00 m wide and 0.60 to 1.40 m in total depth.
How it is made.
Every pool is built entirely in our factory, using an industrialised process, and engineered for its site and loads.
Structure
Galvanised metal, self-supporting and designed to measure.
Shell
High-density EPS machined by CAD: 95% lighter than concrete and 86% better insulation. Recyclable, waterproof, chemically inert and highly impact-resistant.
Waterproofing
Technical mortars in several layers, an EVAC membrane with polyester fibre and two-component sealing.
Test
Watertightness for at least 24 hours, full of water, at the factory.
Plumbing
2 return inlets, skimmer, main drain, vacuum point and LED light, with pressure PVC pipework.
ECOCOMPOSITE
The base material of the patented Desingpool system: lightweight and 100% recyclable.
The collection
Three lines on the same system, from the essential to the most complete.
All three are made to measure, with the steps, the plant room underneath and the filtration as standard: cartridge filter, variable-speed pump and Aqualyser salt chlorinator.
Line Confort
The essential.
The essential
Line Confort
Rounded corners and render in white, beige or grey: the raised pool with a Mediterranean spirit.
Timeless look
As much at home next to a village house as on a rooftop.
Minimal upkeep
Acrylic render is tough, washable and easy to touch up over the years.
Takes every extra
Glass window, interior bench, waterfall, heating pre-installation and heat pump: you can add any of them.
Dimensions
PlanWindow, extraWaterfall, extraWaterfall, extra0.60StepsPool 2.30–6.30 m0.60Total 2.90–6.90 m2.00–3.00 mElevation0.60–1.40 mWater 0.20 m below the coping
- Total length
- from 2.90 to 6.90 mpool from 2.30 to 6.30 m and 0.60 m steps
- Width
- from 2.00 to 3.00 m
- Total depth
- from 0.60 to 1.40 mwater 0.20 m below the coping
- Steps
- 0.60 m modulewith the plant room underneath · 0.15 m edges
- Shape
- Gently rounded corners at the end without steps
- Glass window
- 1.70 × 0.40 mextra
- Interior bench
- Lengthwiseextrafrom the interior steps, or on any of the four walls
- Exterior
- Acrylic renderwhite, beige or grey
Equipment
Standard
- Interior and exterior steps, with the plant room underneath
- Cartridge filter, variable-speed pump and Aqualyser salt chlorinator
- Acrylic render in white, beige or grey
- Porcelain coping of your choice
- Interior in glass mosaic of your choice
Extras
- Interior bench, on any of the four walls
- 1.70 × 0.40 m glass window
- Built-in waterfall in a wall rising 0.60 m above the coping
- Hydromassage jets
- Air hydromassage
- Stainless-steel handrail
- Outdoor benches
- Cushions for the outdoor benches
- Heating pre-installation
- Heat pump
- Automatic cover (raised or built-in)
- Counter-current unit
- Porcelain walls, same as the coping
- Interior in iridescent mosaic or porcelain
Choose and place it all in the configurator on the website.
Line Luxe
Design-led.
Design-led
Line Luxe
Straight lines, porcelain and a glass window to see the water from outside.
The window
A 1.70 × 0.40 m pane makes the water part of the garden.
Interior bench
Full width, at the end without steps or on the wall you choose: for relaxing, not just for swimming.
Porcelain outside
Coping and walls in four stone tones: Aeris, Argentium, Nacre or Sabbia.
Dimensions
PlanWindowWaterfall, extraWaterfall, extra0.60StepsPool 2.30–6.30 m0.60Total 2.90–6.90 m2.00–3.00 mElevation0.60–1.40 mWater 0.20 m below the coping
- Total length
- from 2.90 to 6.90 mpool from 2.30 to 6.30 m and 0.60 m steps
- Width
- from 2.00 to 3.00 m
- Total depth
- from 0.60 to 1.40 mwater 0.20 m below the coping
- Steps
- 0.60 m modulewith the plant room underneath · 0.15 m edges
- Shape
- Square corners
- Glass window
- 1.70 × 0.40 mstandard
- Interior bench
- Full widthstandardat the end without steps, or on any of the four walls
- Exterior
- Porcelainthe same as the coping
Equipment
Standard
- Interior and exterior steps, with the plant room underneath
- Interior bench, on any of the four walls
- 1.70 × 0.40 m glass window
- Heating pre-installation (heat pump sold separately)
- Cartridge filter, variable-speed pump and Aqualyser salt chlorinator
- Porcelain coping and walls of your choice
- Interior in glass mosaic, plain or iridescent, of your choice
Extras
- Built-in waterfall in a wall rising 0.60 m above the coping
- Hydromassage jets
- Air hydromassage
- Stainless-steel handrail
- Outdoor benches
- Cushions for the outdoor benches
- Heat pump
- Automatic cover (raised or built-in)
- Counter-current unit
- Interior in porcelain
Choose and place it all in the configurator on the website.
Line Luxe Plus
The most complete.
The most complete
Line Luxe Plus
One piece of stone, inside and out.
Heating pre-installation
It comes as standard: add the heat pump, sold separately, and swim all year round.
Full-length bench
It starts at the interior steps and runs along the whole back wall, or goes on the wall you choose.
All porcelain
Four stone tones: Aeris, Argentium, Nacre or Sabbia.
Dimensions
PlanWindowWaterfallWaterfall0.60StepsPool 2.30–6.30 m0.60Total 2.90–6.90 m2.00–3.00 mElevation0.60–1.40 mWater 0.20 m below the coping
- Total length
- from 2.90 to 6.90 mpool from 2.30 to 6.30 m and 0.60 m steps
- Width
- from 2.00 to 3.00 m
- Total depth
- from 0.60 to 1.40 mwater 0.20 m below the coping
- Steps
- 0.60 m modulewith the plant room underneath · 0.15 m edges
- Shape
- Square corners
- Glass window
- 1.70 × 0.40 mstandard
- Interior bench
- Full lengthstandardfrom the interior steps, or on any of the four walls
- Exterior
- Porcelainthe same as the coping
Equipment
Standard
- Interior and exterior steps, with the plant room underneath
- Interior bench, on any of the four walls
- 1.70 × 0.40 m glass window
- Built-in waterfall in a wall rising 0.60 m above the coping
- Heating pre-installation (heat pump sold separately)
- Cartridge filter, variable-speed pump and Aqualyser salt chlorinator
- Porcelain inside and out, of your choice
Extras
- Hydromassage jets
- Air hydromassage
- Stainless-steel handrail
- Outdoor benches
- Cushions for the outdoor benches
- Heat pump
- Automatic cover (raised or built-in)
- Counter-current unit
Choose and place it all in the configurator on the website.
Finishes
Outside, porcelain or render; inside, glass mosaic or porcelain. All of them, on all three lines.
Porcelain copings
Acrylic render
- White
- Beige
- Grey
Interiors
Glass mosaic
- White
- Sky blue
- Mist blue
- Aqua green
- Navy blue
Iridescent mosaic
- Papua Blue
- Creta
- Papua Brown
- Iris Saphyre
- Iris Dark
- Iris Artic
Porcelain
- Aeris
- Argentium
- Nacre
- Sabbia
Modules
What goes on your pool, wherever you want it.
- Interior benchStandard on Luxe and Luxe Plus; extra on Confort
- Outdoor benchesExtra on all three
- Glass windowStandard on Luxe and Luxe Plus; extra on Confort
- Extended glassExtra on all three
- Built-in waterfallStandard on Luxe Plus; extra on Confort and Luxe
Raised automatic cover
Extras
Standard or optional, depending on the line.
- Heat pumpSwim all year round
- Heating pre-installationReady to add the heat pump
- Hydromassage jetsJets on the interior bench
- Air hydromassageBubbles from the interior bench
- Stainless-steel handrailRailing for the steps
- CushionsFor the outdoor benches
- Raised automatic coverRoller on show
- Built-in automatic coverRoller under the water
- Counter-current unitSwim without moving
From the factory to the water in two days.
- Built in our factoryIn Balsicas (Murcia), on its transport platform: walls, coping, lining, steps and plant room.
- Tested full of waterBefore it leaves, it spends at least 24 hours full of water: it is only loaded if it does not lose a single drop.
- It travels finishedBy lorry, already clad and equipped: the pool is not built at your home and leaves no rubble.
- Lifted in by craneA crane lifts it over the wall, the hedge or up to the roof terrace.
- It settles into placeOn a firm, level base (a concrete slab or the terrace floor), with no trenches or digging.
- Time to enjoy itWe connect the filtration, fill it and show you how it works: two days after it arrives, it is your pool.
Installation
What your home needs: a firm, level base, a power supply, a water supply and a drain. We study the site before we build it.
Projects
Real projects.
In the garden
Come and see it.
Piscimar Pool
Ctra. N-332, km 37
Directions to Piscimar Pool (opens in a new tab)
03190 Pilar de la Horadada (Alicante)Desingpool factory
C. Laguna de Villasinda, 29, P.I. Balsicas
Directions to the factory (opens in a new tab)
30591 Balsicas (Murcia)
- Mobile & WhatsApp
- +34 627 874 930 (opens in a new tab)
- Piscimar Pool
- +34 965 320 379
- info@desingpool.com
Self-supporting raised pools, made in Murcia.
desingpool.com@desingpool
Piscimar Pools, S.L. · NIF B73555393
Models
From the essential to the most complete.
Mediterranean
Line Confort
Rounded corners and render in white, beige or grey: the raised pool with a Mediterranean spirit.
See the model
Architectural
Line Luxe
Straight lines, porcelain and a glass window to see the water from outside.
See the model
Sculptural
Line Luxe Plus
One piece of stone, inside and out.
See the modelComparison
How do they differ?
Line Confort
- Corners
- Rounded
- Standard exterior
- Render
- Standard interior
- Mosaic
- Interior bench
- Extra: added separately
- Glass window
- Extra: added separately
- Heating pre-installation
- Extra: added separately
- Built-in waterfall
- Extra: added separately
Line Luxe
- Corners
- Square
- Standard exterior
- Porcelain
- Standard interior
- Mosaic or iridescent
- Interior bench
- Full width
- Glass window
- Heating pre-installation
- Built-in waterfall
- Extra: added separately
Line Luxe Plus
- Corners
- Square
- Standard exterior
- Porcelain
- Standard interior
- Porcelain
- Interior bench
- Full length
- Glass window
- Heating pre-installation
- Built-in waterfall
Standard on all three: interior and outside steps with the plant room underneath; cartridge filter, variable-speed pump and Aqualyser salt chlorinator. Extras for any of them: hydromassage jets, air hydromassage, stainless-steel handrail, outdoor benches, cushions for the outdoor benches, heat pump, automatic cover (raised or built-in) and counter-current unit. Made to measure: from 2.90 to 6.90 m long including the steps, from 2.00 to 3.00 m wide and from 0.60 to 1.40 m in total depth.
Not sure which one is yours?
Tell us where you would like to put it and how many of you there are at home. We will recommend a model and size, with no obligation.